Hello friends, today I will talk about the solution to the mobile network problem. At first, I will inform you that the network problem that comes from this mobile comes from where it comes and what is the reason for this problem first I will discuss here.
This is what the problem is for?
This problem is seen from two places, one is to become invalid IMEI, to be a component of a mobile or to a bad part So one of the software problems is another hardware problem, so I’ll discuss the hardware problem here.
This problem comes from the place?
This problem I told you first is that the problem is that the IMEI is invalid and the companies that are in the network have become bad, and I am discussing this program as a result of some bad things happening.
This problem is usually the network antenna that comes from the network antenna when this problem occurs when the mobile network and party turn away from the mobile phone or this problem arises in network IC which is lining up to network antenna. I can tell you step by step I told you that step by step You do this job.
Solution Method:
- First, dial the mobile phone *#06# Then see if the Aami of the mobile is OK. If the mobile IMEI is okay then shoot the following steps
- Open the mobile
- Then clean the motherboard of the mobile
- After cleaning the motherboard of the mobile, check the antenna that has the antenna on the mobile. Whether the network antenna touching with the motherboard of the mobile is OK.
- If the network antenna with touching the motherboard is OK then network antenna supply line, check this line
- If the network antenna lining is not right, then the network will be jumped up from the ic main supply to the network antenna
- Last-At the end you can create a network antenna with a jumper wire network IC that can output the numerical output from the jumper wire.
