Jio Phone Water Damage Dead Solution
The JIO Phone brand is the LYF. And when this LYF mobile is blurred later, I will talk about how you can solve this mobile phone. Hello friends, I am SAHALAL and welcome to my website. See if this mobile is blurred, then first you need to Reading the mobile with the multimeter. And if the component is bad after checking the multimeter, then that component has to be changed. And then you will discuss the steps that you need to use.
Solution Method :
- First, check the mobile with the multimeter
- Then check the mobile battery
- Then open the mobile
- and remove all extra part
- then clean motherboard
- then Sodering full motherboard component
- then power on mobile
Firstly clean the motherboard from the mobile. Then remove the component lid on the motherboard. Then once again clean the components with the mobile cleaner oil. Then you’re well-soldered with a paste have to do. After the soldering, the motherboard will be cooled for at least 10 minutes. After ten minutes of freezing try to restart the mobile. If you do not do the job after doing this work, then you will have to flash the mobile, if you talk about this, I will discuss this topic below.
Software Flashing :
If the problem is not resolved after the hardware of the phone then you can be flashing the software and be letting the software flashing process know here.
What are the requirements for software flashing?
- A computer
- USB Data Cable
- Software flash file
- USB driver
- Flashing Tool
Download Flash File, USB driver, Flashing Tool in Google
Flashing Method :
- first Download USB driver and install now
- You can use any Flash tool that is supported on this mobile
Then open the software tool and import the flash file into the software tool then start flashing the mobile.
I hope you understand that the two ways I have solved this mobile solution are to solve the mobile solution by solving both mobile solutions.